Interior Products
Exterior Products
Concrete Products
Product Videos
Search The Product Library
search now
Valspar® Concrete
Bonding Primer
  • Creates maximum adhesion for top coat finish
  • Better resistance to peeling and flaking
  • Goes on white
  • Easy to tell where product has been applied so no areas are missed during application
  • Can be recoated in 1 hour for shorter project time
Valspar Concrete Bonding Primer is an acrylic-based primer that penetrates and bonds to etched concrete, enhancing the adhesion of the top coat finish. Ideal for use under Valspar Porch & Floor Paints.
Where To Use

Interior or exterior bare concrete

Approximately 0.61 sq m/litre
Preparing Your Surfaces

General: All surfaces must be clean, dry, and free of all loose, peeling paint, or contaminants. Areas where ponding water is evident should be levelled prior to application. Bare concrete: Allow 60 days minimum for new concrete to cure before painting. Clean and etch new or bare concrete with Fast Prep™ Cleaner, Degrease & Etcher. Follow all Fast Prep label instructions. Previously painted surfaces: Clean with an all-purpose cleaner (TSP or substitute) and remove gloss from shiny surfaces by sanding or using a chemical deglosser.

Product Details
Select a Product Detail type and download the PDF.
SDS Information
Find your Safety Data Sheet information for your Valspar products.
find it now
Valspar® Latex
Porch and Floor Paint
  • Non-glare, low sheen paint
  • Gives floors tough, long-lasting protection
  • Durable and weather resistant
  • Easy water clean up
  • Low odour, low VOC
Learn More
Product Finder
We’ll help you find what you need for your project.
Learn More
Paint Samples
Can't decide on a colour? Lowe's sells Paint Samples.
Learn more