Valspar® Protective Sealer Natural Look

This clear sealer resists weather, scuffs and provides a layer of protection while adding a low gloss to the appearance of the surface. It’s easy to apply, won’t yellow or peel and dries in 2 hours.

  • Interior/Exterior
  • Seals semi-transparent stains and bare concrete
  • Ideal for brick, pavers, sidewalks, driveways and patio decks
  • Dries in 2 hours

Opacity

Clear-Crystal Clear


Sizes

3.78 L / 1 Gallon

18.9 L / 5 Gallons


Coverage

7 m²/3.78 L - 14 m²/3.78 L

(150 sq. ft. per gallon)


AVAILABLE AT RONA

HOW TO USE

  • Usage
    Exterior aggregate, concrete, brick, pavers, masonry, mortar and flagstone. Do not use on garage floors.
  • Prep
    All surfaces must be clean, dry and free of all loose, peeling paint or contaminants. Bare concrete: New concrete, masonry surfaces and mortar should be cured 60 days. Previously sealed surfaces: Clean with an all-purpose cleaner (TSP or substitute). Previously sealed surfaces must be porous and able to accept additional sealer. Test surface porosity before sealing
  • Application
    Use a roller or low-pressure, garden-type sprayer. While the first coat is still wet, apply a second coat to maximize protection. Allow 5–10 minutes for final penetration, then use a clean, dry cloth to wipe off all excess that did not soak into the surface. Do not pond or puddle this product.
  • Dry Time
    Dry Time @ 25 °C (77 °F) and 50 % Relative Humidity
    To The Touch: 1 hour 1 hour
    Recoat: 1 hour - 1 hour
  • Clean-up & Disposal
    Clean up with warm, soapy water.
Recommended Coats
1 coats
Dry To the Touch*
1 hour 1 hour
Recoat*
1 hour - 1 hour
*Dry Time @ 25 °C and 50 % Relative Humidity

Data Sheets

Download the product data sheet (PDS) and safety data sheet (SDS) for your Valspar protective sealer natural look.

Product Number Base/Color Container Size SDS PDS
042397705748 Clear 3.78 L
(1 Gallon)
SDS PDS
042397705755 Clear 18.9 L
(5 Gallons)
SDS PDS